Pulse-Bac 500 Series – 150-176 CFM Industrial Dust Collectors
Powerful and compact, the Pulse-Bac 500 Series offers great performance and portability. Designed to capture dust generated by power tools and for job site clean-up, it is ideal for work involving dust from concrete, drywall, and wood.
A great fit for general contractors, finish carpenters, drywall, wood flooring & surface prep professionals. The 500 Series is compliant with OSHA’s Silica Dust Rule. The 550 is also a good choice for facility maintenance and janitorial crews.
- Airflow: 150-176 CFM
- Lift: 87 in.-97 in.
- Filtration: HEPA 99.97% @ .3 Microns
- Inlet & Hose: 1.5-in. Locking, 15-ft. Crush Proof Hose
- Collection: 8 Gal. Steel Tank
Pulse-Bac 550 Model Technical Specifications
Airflow: 150 CFM
Capacity: 8 gallon
Weight: 30 lbs.
Pulse-Bac 550H Model Technical Specifications
Airflow: 150 CFM
Capacity: 8 gallon
Weight: 30 lbs.
Pulse-Bac 500 Series Features and Benefits
Everyone has dealt with the trouble that a clogged vacuum filter creates, it takes up valuable time and creates a mess. Pulse-Bac solves this problem with our patented Automatic Pulse-Clean Technology™ that automatically cleans the filter while you work. Others may claim to have “automatic” or “pulse” filter cleaning, but look closely and you’ll see that they fall short of the original, requiring extra equipment like air compressors or manual gadgets that require work to stop for filter cleaning. These don’t truly solve the problem and make for more work. Only vacuums with the Pulse-Bac name use our unique technology to automatically clean the filter while you work.
Single or Dual-Stage HEPA Filtration
The 550H model provides Dual-Stage HEPA filtration. Dual-Stage filtration models, like all Pulse-Bac vacuums, feature the 5 Point HEPA Filter as an initial stage of filtration and an additional exhaust side HEPA filter. Both the 5 Point Filter and the exhaust side filter are individually tested to meet the 99.97% @ 0.3 microns standard required by most regulations and recommended when working with many materials. In fact, third-party testing of the 550H showed that our 2 stage filtration system actually provided 99.99% @ 0.3µm filtration, exceeding the standard.
Durable Steel Construction
Pulse-Bac units are made for the rugged conditions of a job-site. We don’t cut cost with molded plastic tanks, cheap electrical components and off-shore manufacturing. With tanks made of 16ga. cold-rolled U.S. steel and a steel assembly covered with by a high impact ABS plastic hood, Pulse-Bac is made to keep working even in the most punishing conditions. Even details like wheels are heavy duty, non-marking polyurethane casters, instead of molded plastic wheels on thin spindles. Add the fact that every Pulse-Bac is assembled by hand in our facility in Tulsa, Oklahoma and you’ve got quality you can’t beat.
Automatic Tool Start
Our Automatic Tool Start feature will start the vacuum for you when you start your tool. Plug your tool into the Automatic Tool Start and switch the power button to auto. When your tool activates, the vacuum will turn on automatically. When the tool turns off, the vacuum will run for 3 seconds to clear the hose before it shuts off.
1.5″ Locking Hose & Inlet
Get a tight and secure fit each time you hook the hose up. The locking inlet locks in the high-quality crush proof hose so that it stays put while the unit is in use. This avoids accidental disconnects while working and ensures a good seal for maximum vacuum.
Cyclonic Debris Management
The Cyclonic Debris Management system comes standard on all vacuum tanks, extenders, and pre-separators. Our CDM system works with our pulsing technology and prevents upwards of 90% of dust and debris from ever reaching the filter. The CDM system stops dust and debris from constantly cycling up to the filters and holds it at the bottom of the tank until discarded.
Be sure to check out our dust collector and wet vac accessories including but not limited to replacement filters, dollys, vacuum hoses, HEPA-certified round filters, vacuum wands, HEPA cartridge filters, STI cord carts, dust collection bags and more, as they may be of help to you and your surface preparation team!
Contact Your Pluse-Bac Industrial Dust Collector Experts Today
If you have any questions regarding the Pulse-Bac 500 Series – 150-176 CFM Industrial Dust Collectors or would like to receive a complimentary quote on other dust collectors or other equipment, contact the surface prep experts today by calling (815) 278-1308 or by filling out our contact form. We take pride in guiding our customers however we’re able to, ensuring they make the purchases that are best for them and their projects.
Buy Manufacturer Direct sells surface preparation equipment including but not limited to construction equipment, floor scrapers, burnishers, floor machines, shot blasters, diamond grinders, scarifiers, profilers, and dust collectors (such as the Pulse-Bac 500 Series – 150-176 CFM Industrial Dust Collectors). Along with the machines, BMD only sells OEM consumable parts so that the machines are as effective as they are designed to be. Buying from Buy Manufacturers Direct, you are buying through a channel that is endorsed and supported by its vendor partners. This means you have direct access to the people that make what you buy and know the product better than anyone.