Description
Bonastre System Magic Renova – Flexible Drill Kit 3 in. or 5 in. (75mm-125mm)
Using only water, the Bonastre System Magic Renova Flexible Drill Kit can restore and renew the initial luster and brightness of your marble and stone surfaces.
Recover the natural shine of your surfaces with the help of your drill and the simple process of Bonastre System Magic Renova four-step process discs: #1 red, #2 orange, #3 yellow, and #4 blue.
Ideal for the polishing and polishing process of small areas such as stair steps, bathroom countertops, kitchen bars, walls, etc.
Features
- Polishes and renews countertops and smaller surfaces in residential, hotels, or professional offices
- For use on marble & stone surfaces
- Eco-friendly — uses only water
- Attaches to electric drill
- Removes deep stains without damaging the surface
- Full system contains four (4) steps: #1 red, #2 orange, #3 yellow, and #4 blue discs
- Available in 3-inch (75mm) and 5-inch (125mm) sizes
Instructions
Step 1. Resurfacing – Red Renova Disc
This first step will remove acid etch marks as well as micro scratches and general wear. Add clean water and work the area with at least 20 passes making clockwise circular movements until the surface becomes a consistently matte finish. Rinse and dry the surface; inspect for uniformity.
Step 2. Preparation – Orange Renova Disc
Continue working the surface and prepare for fine polish. Use clean water and work the area with at least 20 passes, making clockwise circular movements. Rinse and dry the surface; inspect for uniformity. Make sure there are no scratches left from the previous step.
Step 3. Polish – Yellow Renova Disc
On this 3rd step, you should be able to see a nice gloss and clear reflection from angle. Use clean water and work the area with at least 20 passes, making clockwise circular movements. Rinse and dry the surface; inspect for uniformity. Make sure there are no scratches left from the previous step.
Step 4. High Gloss Polish – Blue Renova Disc + Green Pad to obtain a “mirror” finish
Use clean water and work the area with at least 20 passes, making clockwise circular movements. Rinse and dry the surface. Repeat step one more time with fresh water to complete the process.
DO NOT USE ON GRANITE
