Description
Smith’s Dry Pigment Packs – for Cement Overlays, Mortars, and Resurfacers
Smith’s Dry Pigment Packs are high quality pigments utilized to integrally color Smith’s 4 in 1 Overlay as well as Smith’s Cementitious Polyurethane Mortar/Resurfacer.
Available in 16 base colors, these pigments are pre-measured to help installers achieve uniform color from mix to mix during application. Smith’s Dry Pigment Packs meet or exceed ASTM C-979 requirements for integral color pigments.
Smith’s Dry Pigment Packs – Key Features
- Achieves natural appearance
- 16 colors
- Increased surface durability
- Ultra Violet Light Resistant
- Non-blushing
- Low VOC
- Resistant to hot tire pickup
- Interior and Exterior application
Smith’s Dry Pigment Packs – Colors
Smith’s Dry Pigment Packs – Colors- SDCP-CPD05: Adobe Buff
- SDCP-CPD10: Sun Buff
- SDCP-CPD15: Arabian Sand
- SDCP-CPD20: Limestone
- SDCP-CPD25: Sand Taupe
- SDCP-CPD30: Canyon Clay
- SDCP-CPD35: Dark Walnut
- SDCP-CPD40: Slate
- SDCP-CPD45: Maplewood
- SDCP-CPD50: Athens Clay
- SDCP-CPD55: Terra Cotta
- SDCP-CPD60: Rio Red
- SDCP-CPD65: Platinum Grey
- SDCP-CPD70: French Grey
- SDCP-CPD75: Medium Grey
- SDCP-CPD80: Charcoal
Note: The colors represented on the Color Chart provide an approximation of the final color appearance when sealed with Smith’s Royal Seal (solvent-based acrylic sealer).
Smith’s Dry Pigment Packs – Product Data Sheet Information
GENERIC TYPE
Iron oxide pigments
GENERAL PROPERTIES
Smith’s Dry Pigment Packs are high quality pigments utilized to integrally color Smith’s 4 in 1 Overlay as well as Smith’s Cementitious Polyurethane Mortar / Resurfacer. Available in 16 base colors, these pigments are pre-measured to help installers achieve uniform color from mix to mix during application. Smith’s Dry Pigment Packs meet or exceed ASTM C-979 requirements for integral color pigments.
RECOMMENDED USE
Integral color option for:
- Smith’s 4 in 1 Overlay – White
- Smith’s Cementitious Polyurethane Mortar – Self Leveler (SL), Rake and Trowel (MD) and Trowel (HD) grades
COVERAGE
One (1) pre-measured Dry Pigment Pack color per one (1) 50 lb. bag of Smith’s 4 in1 Overlay – White.
STORAGE CONDITIONS
Temperature:
Moisture free environment at 50-90°F
DIRECTIONS FOR USE
- Empty one (1) unit of Smith’s Dry Pigment Pack into ready-to-use Smith’s 4 in 1 Overlay or 1 kit of Smith’s Cementitious Polyurethane Mortar/Resurfacer.
- Mechanically mix until uniform color is achieved.
