Smith’s 4 in 1 Overlay – Polymer Modified Cement

Description

Smith’s 4 in 1 Overlay – Polymer Modified Cement

Smith’s 4 in 1 Overlay is a polymer modified cement. It comes in a single bag formula dry mix that requires only added water to produce a permanent bonding cement overlay for both interior and exterior installations.

This unique mix does not require a bond coat and allows the installer to apply the product as a stamped overlay, spray texture, trowel substrate, or vertical surface. Excellent product for pool and patio decks!

Recommended Uses: Designed for any non-flexible surface requiring a maximum strength cement overlay as well as a resurfacing layer over existing coatings and substrates. Smith’s 4 in 1 Overlay is suitable for applications from vehicular traffic to residential flooring and countertops. Its heat reduction characteristics make Smith’s 4 in 1 Overlay an excellent product for pool decks and patios. Not recommended for: flexible or unstable substrates.

Colors: Product dries as white (or grey). Use Smith’s Dry Pigment Packs to add color.

Grit: Choose course or fine.

Storage Conditions: Moisture free environment at 50-90°F. Do not freeze.

Smith’s 4 in 1 Overlay – Features

• Water only – no more additive waste
• Horizontal and vertical applications
• Ultra high polymer modification
• Low Odor
• Multiple applications in one bag
• High strength (rated for vehicle traffic)
• Interior and Exterior application
• Ready to stamp immediately
• Saves time and labor

Smith’s 4 in 1 Overlay – Coverage (per 50 lb. bag)

• 1/4 to 1/2 inch stamp coat = 20-30 sq ft
• 1/16 to 1/8 inch trowel coat = 75-100 sq ft
• Spray – knock down texture = 125-150 sq ft

Note: Coverage depends on surface porosity and product build.

Smith’s 4 in 1 Overlay – Pallet

• Full pallet = Sixty (60) 50-lb bags
• Please call 815-278-1308 for discount pricing for pallet