Description
Smith’s Polyaspartic 8000LO is a low odor, solvent-based, low viscosity, high-performance, 2-component, 76% solids Aliphatic Polyaspartic coating with a gloss finish which yields a resilient, U.V. Stable & abrasion resistant film for application to a variety of substrates including, but not limited to concrete, wood or metal as a primer or in conjunction with a variety of coatings systems to include epoxy-based, cementitious urethanes, broadcast systems such as Vinyl Chip, Quartz, etc.
Smith’s Polyaspartic 8000LO was developed for ease of use with a 1 to 1 mix ratio plus a longer working time than most competitors Polyaspartic products as well as minimal odor during application.
Smith’s Polyaspartic 8000LO is an excellent coating for Vinyl Chip, Color Quartz, Smith’s Metallic & Luster, broadcast solid color shop floors & pigmented system applications for Residential, Retail, Commercial or Industrial environments which demand color stability, faster return-to-service & durability.
Smith’s A/O 325 Low Sheen additive is available separately to achieve a low sheen finish as a topcoat with Smith’s Polyaspartic 8000LO. For solid colors, Smith’s Polyaspartic 8000LO accepts Smith’s ISC Color Packs.
RECOMMENDED USES:
- Fast Return-to-Service Applications
- Food & Beverage Floors
- Forklift traffic areas
- Manufacturing Areas & Aisleways
- Decorative Concrete Systems & Stains
- Loading Docks
- Institutional, Retail, Commercial & Residential Environments
- Schools & Universities
- Pharmaceutical Floors
HIGHLIGHTS:
- Very Low Odor & less than 248 g/L VOC’s
- Extended Pot-Life vs. traditional Polyaspartic products
- Capable of up to 15 mils per coat without foaming
- Highly Durable
- Easy to Clean
- Hot Tire Pickup Resistant
- Aliphatic – Non-Yellowing
- For Interior & Exterior Use
- Overnight Return-to-Service
- Hot Liquid Spill Tolerant to 300°F (148.8°C) or 250°F (121.1°C) extended liquid temperature exposure when applied over a thermal shock resistant coating system, such as Smith’s CPR
- Non-Tainting for areas at risk of food flavor contamination
- Meets FDA & USDA flooring requirements (indirect food contact)
