Straight from the Source
Navigation

Smith’s Dry Pigment Packs – for Cement Overlays, Mortars, Resurfacers

$0.00$9.94

  • Achieves natural appearance
  • 16 colors
  • Ultra Violet Light Resistant
  • Non-blushing
  • Low VOC
  • Interior and Exterior application
  • Use with Smith’s 4 in 1 Overlay or 1 kit of Smith’s Cementitious Polyurethane Mortar/Resurfacer
12 months with 0% interest for qualified customers on equipment purchases of $10,000 or more.

Description

Smith’s Dry Pigment Packs – for Cement Overlays, Mortars, and Resurfacers

Smith’s Dry Pigment Packs are high quality pigments utilized to integrally color Smith’s 4 in 1 Overlay as well as Smith’s Cementitious Polyurethane Mortar/Resurfacer.

Available in 16 base colors, these pigments are pre-measured to help installers achieve uniform color from mix to mix during application. Smith’s Dry Pigment Packs meet or exceed ASTM C-979 requirements for integral color pigments.

Smith’s Dry Pigment Packs – Key Features

  • Achieves natural appearance
  • 16 colors
  • Increased surface durability
  • Ultra Violet Light Resistant
  • Non-blushing
  • Low VOC
  • Resistant to hot tire pickup
  • Interior and Exterior application

Smith’s Dry Pigment Packs – Colors

  • SDCP-CPD05: Adobe Buff
  • SDCP-CPD10: Sun Buff
  • SDCP-CPD15: Arabian Sand
  • SDCP-CPD20: Limestone
  • SDCP-CPD25: Sand Taupe
  • SDCP-CPD30: Canyon Clay
  • SDCP-CPD35: Dark Walnut
  • SDCP-CPD40: Slate
  • SDCP-CPD45: Maplewood
  • SDCP-CPD50: Athens Clay
  • SDCP-CPD55: Terra Cotta
  • SDCP-CPD60: Rio Red
  • SDCP-CPD65: Platinum Grey
  • SDCP-CPD70: French Grey
  • SDCP-CPD75: Medium Grey
  • SDCP-CPD80: Charcoal

Note: The colors represented on the Color Chart provide an approximation of the final color appearance when sealed with Smith’s Royal Seal (solvent-based acrylic sealer).


Smith’s Dry Pigment Packs – Product Data Sheet Information

GENERIC TYPE
Iron oxide pigments

GENERAL PROPERTIES
Smith’s Dry Pigment Packs are high quality pigments utilized to integrally color Smith’s 4 in 1 Overlay as well as Smith’s Cementitious Polyurethane Mortar / Resurfacer. Available in 16 base colors, these pigments are pre-measured to help installers achieve uniform color from mix to mix during application. Smith’s Dry Pigment Packs meet or exceed ASTM C-979 requirements for integral color pigments.

RECOMMENDED USE
Integral color option for:

  • Smith’s 4 in 1 Overlay – White
  • Smith’s Cementitious Polyurethane Mortar – Self Leveler (SL), Rake and Trowel (MD) and Trowel (HD) grades

COVERAGE
One (1) pre-measured Dry Pigment Pack color per one (1) 50 lb. bag of Smith’s 4 in1 Overlay – White.

STORAGE CONDITIONS
Temperature:
Moisture free environment at 50-90°F

DIRECTIONS FOR USE

  1. Empty one (1) unit of Smith’s Dry Pigment Pack into ready-to-use Smith’s 4 in 1 Overlay or 1 kit of Smith’s Cementitious Polyurethane Mortar/Resurfacer.
  2. Mechanically mix until uniform color is achieved.

Additional information

Weight .82 lbs
Dimensions 3 × 3 × .75 in
Dry Pigments

Adobe Buff, Arabian Sand, Athens Clay, Canyon Clay, Charcoal, Dark Walnut, French Grey, Limestone, Maplewood, Medium Grey, Platinum Grey, Rio Red, Sand Taupe, Slate, Sun Buff, Terra Cotta

Downloads

Smiths-Dry-Pigments_Product-Data-Sheet

Smiths-Dry-Pigments-4in1_Color-Chart

Smiths-Dry-Pigments-Various-Colors_SDS

You may also like…