Straight from the Source
Navigation

Smith’s Polyaspartic 5000 LO

$177.07

Kit Size: 1.5 Gallons

Mix Ratio: 2A : 1B

Finish – High Gloss

12 months with 0% interest for qualified customers on equipment purchases of $10,000 or more.
SKU: SCS-ASP5000-192kit Categories: , Brand:

Description

Smith’s Polyaspartic 5000 LO is a High Performance, Low Odor, 86% Solids, 2-Component, Aliphatic Polyaspartic with a high gloss finish.  This product yields a U.V. stable, hard, resilient and abrasion resistant film with good splash and chemical spill resistance properties.

Smith’s Polyaspartic 5000 LO may be used for a variety of applications to include body coats and wear surfaces for commercial, industrial, or residential traffic environments [i.e. high build topcoat over Metallic & Luster floors (>8 mils WFT) or as the body coat mixed with metallic; as a body coat or grout coat (up to 20 mils in a single lift) for Vinyl Chip and Color Quartz systems; as a pigmented grout coat over solid color Smith’s CPR Cementitious Urethane in food processing/production environments, etc.] where low odor, good chemical resistance, durability and color stability is required.

Kit Size: 1.5 Gallons

Mix Ratio 2A : 1B

RECOMMENDED USE:

  • Food & Beverage Floors
    • U.V. stable grout coat good for color stability over broadcast media systems (i.e. Vinyl Chip or Color Quartz)
  • Grout Coats for broadcast floor systems as well as High Build, High Gloss Topcoat for Metallic & Luster floors (>8 mils)
  • Ideal for:
    • Food & Beverage Floors
    • Commercial, Institutional, Retail & Residential environments
    • Pharmaceutical Floors

HIGHLIGHTS:

  • Even lower odor than previous Polyaspartic 5000 formula
  • Superior build & leveling characteristics for a high solids Polyaspartic product
    • Can achieve a high gloss “epoxy like” finish when applied over a flat, smooth surface at >8 mils
    • May be installed up to 20 mils per lift
  • For Interior & Exterior Use – U.V. Light Stable
  • Forklift traffic after 24 to 44 hours (depending on mil thickness, temperature & humidity)
  • Durable – Chemical Resistant
  • Good Working Time – 20 minutes @ 72°F (121°C) with 50% Ambient Humidity at >8 mils
  • Easy to clean
  • Resistant to Hot Tire Pickup
  • Incidental Hot Liquid Spill Tolerant to 230°F (121°C) when applied over a thermal shock resistant coating system, such as Smith’s CPR products or similar
  • Meets FDA, USDA, CFIA standards for flooring
  • Clear; Accepts Smith’s ISC solid color packs (sold separately) as well as Smith’s Metallic & Luster pigments as a U.V. stable metallic body coat (applied @ 20 mils)

Downloads

Smiths-Polyaspartic-5000-LO-pds-

SDS-Smiths-Polyaspartic-5000LO-Part-A-

SDS-Smiths-Polyaspartic-5000LO-Part-B-