In order to keep your IMPACTS S210E 40R shot blaster working efficiently, you need to keep up with regular maintenance. At BMD, we carry all the shot blaster replacement parts you need to keep your equipment up and running. From replacement cables and liner kits to blast wheels, we have the gear to keep it going strong. However, we know you need to know how to replace these parts correctly, so to help you out, we’re providing a step-by-step guide on how to change the blast wheel on your IMPACTS S210E 40R shot blaster. To get a better idea of how to change your blast wheel, watch the step-by-step video below!
Tools to Change Your Shot Blaster Blast Wheel
Before you get started, make sure you have your tools to change the blast wheel, including:
- New blast wheel kit
- M13 wrench
- M17 wrench
- M8 Allen wrench
- Hammer or wood block
You may also want to grab a small dish to keep the nuts you remove in so they don’t get misplaced or lost.
Taking Off the Old Blast Wheel
First, follow these steps for removing the old blast wheel:
- Remove the urethane feed spout from the front of the blast cover.
- Loosen the clamps on the side of the control cage and remove the control cage and discard it.
- Loosen and remove the four nuts that hold the blast housing cover in place and take the cover off.
- Wedge a hammer head or a wooden block between the blast wheel and the side of the machine to keep the wheel still. Using the Allen wrench, loosen the cap screw on the blast wheel and remove.
- Discard the old blast wheel.
Attaching Your New Shot Blaster Blast Wheel
Once the old part is removed and discarded, follow these steps to put the new blast wheel in place:
- Line up the three notches on the blast wheel with the three pins on the blast wheel hub. You may need to rotate the wheel until you feel the pins and notches line up.
- Insert the cap screw and tighten to secure the blast wheel in place, making sure to lock the wheel with a hammer head or wood block to keep it from turning while you’re trying to get it tight.
- Put the blast wheel cover back on, securing with the nuts.
- Attach the new control cage, making sure to put the new notches at 8:30 and 10:30, as if you’re looking at a clock, then use the clamps to hold the control cage in place.
- Finally, add the red rubber coupling and roll it up to seal the gap between the feed spout.
Contact Us for Shot Blaster Replacement Parts
If you have an IMPACTS shot blaster, we can help you keep it in excellent working condition with a wide variety of replacement parts. Contact us today to speak with a product expert today by calling (815) 472-9754 or by filling out our contact form to get started!