Description
Compact Kit for performing the Tramex Installation Quick Check for Concrete Moisture
Even if pre-installation tests have been performed, checking the %MC and ambient dew-point conditions at the time of installation is crucial to ensure successful installation. The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete moisture content using Gravimetric testing as a baseline. The CMEX5 has a built-in hygrometer providing ambient relative humidity, temperature and dew-point measurements. The Infrared Thermometer provides surface temperature readings for comparison with the dew-point conditions to avoid condensation-related issues at the time of installation and floor failures. The Tramex Meters App allows for data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts. The Tramex Flooring Installation Quick Check Plus Kit comes in a Tramex Easy-travel case.
Concrete Moisture Encounter X5 – CMEX5 – Measuring Range:
- Depth of penetration in concrete: approx. ¾” (20mm)
- Moisture content for Concrete: 0 ? 6.9 %
- Comparative for Gypsum floor screed: 0 ? 12
- CM Equiv Anhydrite/Concrete: 0?2.7 / 0?4.3
- Reference scale: 0 ? 100
- Relative Humidity: 0 ? 99%
- (with optional Hygro-i2 ® probe): Humidity accuracy: 0% ? 99%RH +/- 2% @ 25°C / 77°F
- Moisture content for wood (with optional wood pin probes): 5 ? 30 %
Infrared Thermometer IRT2
- Temperature range: -58ºF ~ 1202ºF (-50 to 650 ºC)
- Distance to Spot ratio: D:S = 12:1
- Display resolution: 0.1 ºF(0.1ºC) <1000 1ºC >1000
- Accuracy for targets:
- Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC)
- ±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC) ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5%
- Repeatability: -58~68ºF (-50~20ºC) : ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC)
- Response time: 150ms
- Spectral response: 8~14um
- Emissivity: Digitally adjustable from 0.10 to 1.0
- Over range indication: LCD will show “—-”
- Polarity: Automatic (no indication for positive polarity); Minus (-) sign for negative polarity
- Diode laser output: <1mW,Wavelength 630~670nm, Class 2 laser product
- Operating temp.: 32 to 122ºF ( 0 to 50ºC)
- Storage temp.: 14 to 140ºF (–10 to 60ºC)
- Relative humidity: 10%~90%RH operating, <80%RH storage
- Power supply: 9V battery, NEDA 1604A or IEC 6LR61, or equivalent
- Safety: “ CE ” Comply with EMC
